manualshive.com logo in svg

Honeywell 4800dr - Document Camera, Barcode Manual

Share
Download
Honeywell 4800dr - Document Camera Barcode Manual Download Page 130

13 - 2

North America

Telephone:  (800) 782-4263
Fax:  (803) 835-8012
E-mail:  [email protected]

Latin America

Telephone:  (803) 835-8000 
Telephone:  (800) 782-4263 
Fax:  (239) 263-9689
E-mail: [email protected]

Brazil

Telephone:  +55 (21) 3535-9100
Fax:  +55 (21) 3535-9105
E-mail:  [email protected]

Mexico

Telephone:  +52 (55) 5203-2100
Fax:  +52 (55) 5531-3672
E-mail:  [email protected]

Europe, Middle East, and Africa

Telephone: +31 (0) 40 2901 633
Fax:  +31 (0) 40 2901 631
E-mail:  [email protected]

Asia Pacific

Telephone:  +852-2511-3050 
Fax:  +852-2511-3557
E-mail:  [email protected]

Japan

Telephone:  +813-3839-8511 
Fax:  +813-3839-8519 
E-mail:  [email protected]

Online Product Service and Repair Assistance

You can also access product service and repair assistance online at

 www.honeywell.com/aidc

.

Limited Warranty

Honeywell International Inc. ("HII") warrants its products and optional accessories to be free from defects 
in materials and workmanship and to conform to HII’s published specifications applicable to the products 
purchased at the time of shipment.  This warranty does not cover any HII product which is (i) improperly 
installed or used; (ii) damaged by accident or negligence, including failure to follow the proper mainte-
nance, service, and cleaning schedule; or (iii) damaged as a result of (A) modification or alteration by the 
purchaser or other party, (B) excessive voltage or current supplied to or drawn from the interface connec-
tions, (C) static electricity or electro-static discharge, (D) operation under conditions beyond the speci-
fied operating parameters, or (E) repair or service of the product by anyone other than HII or its 
authorized representatives.

Summary of Contents for 4800dr - Document Camera



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands