Honda tourer Owner'S Manual Download Page 511

Page: 511 / 581

Reinstall the luggage area under-
tray.

Store the wheel cover or centre
cap in the spare tyre well. Make
sure it does not get scratched or
damaged.

Lower the luggage area floor lid.

Make sure all items are secured in
the luggage area.

Store the tool kit case.

Store the jack in its holder. Turn
the jack’s end bracket to lock it in
place.

Store the tools in the tool kit case.

Secure the flat tyre by screwing
the wing bolt back into its hole.

Place the flat tyre face down in the
spare tyre well.

If your vehicle has a compact
spare tyre, remove the spacer
cone from the wing bolt, turn it
over, and put it back on the bolt.

23.

24.

25.

22.

21.

20.

18.

19.

Changing a Flat Tyre

Taking Care of the Unexpected

508

Loose items can fly around
the interior in a crash and
could seriously injure the
occupants.

Store the wheel, jack, and
tools securely before driving.

WING BOLT

SPACER
CONE

For
spare
tyre

For
normal
tyre

06/09/21 11:02:51 32SED640_511

Summary of Contents for tourer






































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for tourer

Reviews:

Related manuals for tourer

Brands by name

Popular brands

Honda tourer, Owner'S Manual

Search results

Summary of Contents for tourer

Reviews:

Related manuals for tourer

Brands by name

Popular brands