Honda tourer, Owner'S Manual

Page: 111 / 581

Before performing this setting, make
sure the a language selection has
been already made.
To exit this mode without changing
the current setting, select
,
and press the SEL/RESET button.
When WARNING MESSAGE is set
to ON, a message appears along with
a warning symbol when there is a
problem with the vehicle. Select ON
or OFF by pressing the INFO button,
and enter your selection by pressing
the SEL/RESET button. The
confirmation screen appears for 2
seconds, then ‘‘CUSTOMIZE
MENU’’ returns.
Press the SEL/RESET button. The
display changes. The highlighted
unit, mph or km/h, is the current
setting. To change the setting, press
the INFO button until the unit you
want is highlighted, then press the
SEL/RESET button.
When your choice (mph) is set, the
display shows ‘‘mph SETUP’’ for
several seconds, then returns to
CUSTOMIZE MENU.
To exit this mode without changing
the current setting, select
,
and press the SEL/RESET button.
Warning Message
Multi-Information Display
Instruments and Controls
108
06/09/21 10:08:17 32SED640_111