Honda tourer, Owner'S Manual

Page: 135 / 581

When you turn the ignition switch to
the ON (II) position, the immobilizer
system indicator should come on for
a few seconds, then go out. If the
indicator starts to blink, it means the
system does not recognize the
coding of the key. Turn the ignition
switch to the LOCK (0) position,
remove the key, reinsert it, and turn
the switch to the ON (II) position
again.
The system may not recognize your
key’s coding if another immobilizer
key or other metal object is near the
ignition switch when you insert the
key. To make sure the system
recognizes the key code:
Your vehicle also comes with two
remote transmitters built into the
ignition keys; see page
for an
explanation of the remote
transmitter operation.
The Immobilizer System protects
your vehicle from theft. A properly-
coded ignition key must be used in
the ignition switch for the engine to
start. If an improperly-coded key (or
other device) is used, the engine’s
fuel system is disabled.
Do not keep other immobilizer
keys on the same key ring.
Use a plastic or leather key fob,
not metal.
Keep other keys away from your
vehicle’s key and the ignition
switch while trying to start the
engine.
If the system repeatedly does not
recognize the coding of your key,
contact your dealer.
138
Remote transmitter
Immobilizer System
Keys and Locks
Instruments and Controls
132
06/09/21 10:11:29 32SED640_135