Honda tourer, Owner'S Manual

Page: 480 / 581

Open the bonnet.
Remove the socket from the
headlight assembly by turning it
one-quarter turn anticlockwise.
Remove the burned out bulb by
pulling it straight out of its socket.
Push the new bulb straight into
the socket until it bottoms.
Insert the socket back into the
headlight assembly. Make sure
the bulb is installed correctly by
looking through the headlight lens.
The pins on the base of the bulb
should fit in the holes in the
headlight assembly. Pivot the
hold-down wire back in place and
clip the end into the slot.
Install the rubber seal over the
back of the headlight assembly.
Make sure it is right side up; it is
marked ‘‘TOP.’’
Push the electrical connector onto
the new bulb. Make sure it is
connected securely.
Turn on the headlights to test the
new bulb.
On the left side, reinstall the air
intake cover. Reinstall the three
fasteners and secure them by
pushing on the heads until they
lock.
2.
1. 5.
6.
7.
8.
9.
10.
CONTINUED
Replacing a Front Turn Signal
Light Bulb
Lights
Maintenance
477
Petrol models
SOCKET
06/09/21 10:58:39 32SED640_480