Honda tourer, Owner'S Manual

Page: 280 / 581

Repeat this until all six positions
are loaded. The system will then
begin playing the last CD loaded. To load a single CD:
Press and release the LOAD
button.
If you stop loading CDs before all six
positions are filled, the system will
wait for ten seconds, then stop the
load operation and begin playing the
last CD loaded.
The system will load the CD, and
begin playing it.
The disc number icon for an
empty position is highlighted on
the Navigation System display and
the green CD load indicator comes
on. When you see ‘‘LOAD’’ in the
upper display, insert the disc into
the CD slot. Insert it only about
halfway; the drive will pull it in the
rest of the way.
Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.
When ‘‘LOAD’’ appears again in
the display, insert the next disc
into the CD slot.
Insert the disc into the CD slot.
Insert it only about halfway; the
drive will pull it in the rest of the
way. You will see ‘‘BUSY’’ in the
display. The CD load indicator
turns red and blinks as the CD is
loaded.
Press and hold the LOAD button
until you hear a beep, then you see
‘‘LOAD’’ in the upper display.
To load multiple CDs in one
operation:
1.
2.
3.
4.
1.
2.
3.
CONTINUED
Audio System (C Type)
Comf ort and Convenience Features
Loading CDs in the Changer
277
06/09/21 10:29:50 32SED640_280