Honda tourer, Owner'S Manual

Page: 492 / 581

If the engine fails to start, return
to step 3.
After the engine restarts, press
the accelerator pedal slightly and
hold it at approximately 1,500 rpm
for about 30 seconds. This will
complete the air bleeding in the
fuel system.
The engine runs normally, but the
malfunction indicator lamp or the
glow plugs indicator remains lit.
Start the engine (see page ). If
the engine does not start right
away, do not hold the ignition key
in the START (III) position for
more than 10 seconds at a time.
This will damage the fuel pump
and the engine starter.
To turn off the indicator, restart and
turn off the engine at least three
times at intervals of approximately
30 seconds.
If this procedure is performed
during normal driving, the indicator
will be turned off.
If you are not sure how to bleed the
air, contact your dealer.
If the engine fails to restart after
priming the fuel system, there is a
problem in the fuel system. You
should have the vehicle inspected by
your dealer.
6.
5.
7.
4. 367
Storing Your Vehicle
Maintenance
489
06/09/21 11:00:36 32SED640_492