manualshive.com logo in svg

Honda Pioneer 1000 2017, Owner'S Manual, Page: 69 / 307

Share
Download
Honda Pioneer 1000 2017 Owner'S Manual Download Page 69

*OTUSVNFOUT$POUSPMT

4JEF/FUT

The side nets can be rolled up to make cleaning and maintaining 
your Honda SXS a little easier.

Front Side Nets Roll Up

1. Release the side net buckle and side net D-rings.
2. Roll up the side net tightly, folding in the buckle and side net 

D-ring belts on the way.

3. Hook the upper side net hook to the top edge of the side net.

Front Side Nets Roll Down

1. Unhook the upper side net hook.
2. Fasten the side net buckle and tighten the belt of the side net 

D-rings.

Always return the side nets to their normal positions, properly 
fastened, and tightened before driving.

3PMM6Q5IF4JEF/FUT

side net D-rings

side net buckle

side net hook

Summary of Contents for Pioneer 1000 2017




















































































































































































































































































































Reviews:

No comments