manualshive.com logo in svg

Honda Pioneer 1000 2017, Owner'S Manual, Page: 265 / 307

Share
Download
Honda Pioneer 1000 2017 Owner'S Manual Download Page 265

5BLJOH$BSFPGUIF6OFYQFDUFE

*GUIF#BUUFSZ*T-PX

1. To prevent an accidental short circuit, turn the ignition switch 

OFF (

w

).

2. Remove the front hood (page 137).
3. Using a fully charged 12-volt battery, connect the positive (+) side 

of the jumper cable to the charged battery, and connect the 
positive (+) side on the other end of the jumper cable to the 
positive (+) terminal of vehicle battery.

4. Connect the negative (-) side of the jumper cable to the charged 

battery, and connect the negative (-) side on the other end of the 
jumper cable to the front final gear case bracket.

5. After starting the engine, remove the negative (-) sides of the 

jumper cable from the vehicle and the battery. Then remove the 
positive (+) sides of the jumper cable from the vehicle battery and 
the charged battery.

6. Close the rubber dust cover and install the front seat.

• Do not let the positive (+) side of the jumper cable touch on the 

negative (-) terminal.

• If the jumper cable is connected to the battery with the polarity 

reversed, the battery can explode or the electrical system will 
be seriously damaged.

UNDER FRONT HOOD
LEFT SIDE

charged battery

front final gear case bracket

jumper cable

vehicle battery

Summary of Contents for Pioneer 1000 2017




















































































































































































































































































































Reviews:

No comments