manualshive.com logo in svg

Honda Pioneer 1000 2017, Owner'S Manual, Page: 64 / 307

Share
Download
Honda Pioneer 1000 2017 Owner'S Manual Download Page 64

*OTUSVNFOUT$POUSPMT

4JEF/FUT

Your Honda SXS is equipped with side nets to prevent branches, or 
other debris from getting inside the driver’s compartment, and to 
keep the driver’s and passenger’s hands and arms inside the 
occupant protective structure (OPS) if the vehicle ever tips or 
overturns.

The side nets are secured to the OPS with side net D-rings, side net 
snap hooks and side net buckles. To function properly, the side nets 
should be tight. If a side net is loose, tighten the belts on the side net 
D-rings.

Be sure the side nets are properly latched before driving your Honda 
SXS, and never remove side nets from the vehicle. Inspect the 
condition of the side net and its mounting hardware. If there is wear, 
deterioration, damage, or they do not latch and tighten securely, see 
your dealer for repair or replacement.

Summary of Contents for Pioneer 1000 2017




















































































































































































































































































































Reviews:

No comments