5BLJOH$BSFPGUIF6OFYQFDUFE
*GUIF5SBOTNJTTJPO*T/PU
'VODUJPOJOH1SPQFSMZ
8. Return the gear change tool to the tool kit.
9. Check that “E” is blinking. Next, tighten the emergency valve.
Proceed to
“E” is blinking
.
If “–” is not displayed in the gear position indicator and you change
the gear position by using the gear change tool, the DCT system will
automatically stop. To reactivate the system, turn the ignition switch
to the OFF (
w
) position, and then turn it back to the ON (
q
) position.
“E” is blinking:
Tighten the emergency valve. Perform the following procedure.
1. Turn the ignition switch to the OFF (
w
) position, and then stop
the engine.
2. Remove the rear mudguard lid (page 141).
3. Loosen the bolt and release the lock plate, and turn the
emergency valve all the way in.
4. Tighten the bolt and the lock plate.
5. Install the rear mudguard lid.
UNDER CARGO BED
emergency valve
lock plate
bolt
Summary of Contents for Pioneer 1000 2017
Page 17: ... SJWFS 1BTTFOHFS 4BGFUZ 4BGFUZ BCFMT general warning tag ...
Page 20: ... SJWFS 1BTTFOHFS 4BGFUZ ...
Page 126: ... BTJD 0QFSBUJPO SJWJOH VJEFMJOFT BLANK PAGE ...
Page 240: ...5JQT ...