manualshive.com logo in svg

Honda Pioneer 1000 2017, Owner'S Manual, Page: 152 / 307

Share
Download
Honda Pioneer 1000 2017 Owner'S Manual Download Page 152

4FSWJDJOH:PVS)POEB

+BDL6Q1PJOU4VQQPSU1PJOU

Refer to 

Safety Precautions

 on page 123.

When jacking up and supporting this vehicle, the following jack-up 

points and support points should be used.

When using a jack, always abide by the following instructions.

• Do not leave the engine running.

• (SXS1000M3/M3D/M5/M5D only)

Move the drive mode select lever into 4WD Diff Lock position and 

move the shift select lever into the park (P) position.

(SXS1000M3L/M5L only)

Move the drive mode select lever into 

I

 - 4WD position and move 

the shift select lever into the park (P) position.

• Use only on a firm level surface.

• Place a jack only at the specified jack-up point.

• Do not leave any person or cargo in the vehicle.

• Do not place any object above or under a jack.

WARNING

3

8"3/*/(

The vehicle can easily roll off a jack, seriously 

injuring anyone underneath.

Follow the directions for changing a tire 

exactly, and never get under the vehicle when 

it is supported only by the jack.

support point

support point

jack up point

jack up point

Summary of Contents for Pioneer 1000 2017




















































































































































































































































































































Reviews:

No comments