manualshive.com logo in svg

Honda Pioneer 1000 2017, Owner'S Manual, Page: 192 / 307

Share
Download
Honda Pioneer 1000 2017 Owner'S Manual Download Page 192

4FSWJDJOH:PVS)POEB

4QBSL1MVHT

Use only the recommended type of spark plug in the recommended 
heat range.

NOTICE

Using spark plugs with an improper heat range can cause engine 
damage.

This SXS uses spark plugs that have an iridium coated center 
electrode.
Be sure to observe the following when servicing the spark plugs.

• Do not clean the spark plugs. If an electrode is contaminated with 

accumulated objects or dirt, replace the spark plug with a new 
one.

• To check the spark plug gap, use a “wire-type feeler gauge” 

only. To prevent damaging the iridium coating of the center 
electrode, never use a “leaf-type feeler gauge.”

• Do not adjust the spark plug gap. If the gap is out of 

specification, replace the spark plug with a new one.

4QBSL1MVH3FDPNNFOEBUJPO

standard spark plug

SILMAR7A9S (NGK)

Summary of Contents for Pioneer 1000 2017




















































































































































































































































































































Reviews:

No comments