6 of 14
AII 22054 (0104)
© 2001 American Honda Motor Co., Inc - All Rights Reserved.
19. Release the four retaining tabs that secure the
upper anchor cover, and remove the anchor
cover. Take care not to damage the retaining
tabs.
PASSENGER'S SLIDING
DOOR SILL TRIM
CLIP
(5)
17. On the passenger's side of the vehicle, remove
the sliding door sill trim (lift up to release the five
clips).
FRONT DOOR
OPENING TRIM
RETAINING
TABS
CLIP
CENTER PILLAR
LOWER TRIM PANEL
LOWER
ANCHOR
COVER
FRONT SEAT BELT
LOWER ANCHOR BOLT
TORQUE: 32 Nžm (24 lb-ft)
(Note the sequence of washers.
Tape the washers together to
prevent them from being disrupted.)
FRONT SEAT
BELT UPPER
ANCHOR COVER
SEAT BELT ADJUSTER
RETAINING
TABS (4)
CLIP
CENTER PILLAR
UPPER TRIM
RETAINING TAB
20. Remove the front seat belt upper anchor bolt.
21. Remove the clip that secures the top of the
center pillar upper trim, and remove it by sliding
it upward. Take care not to damage the retaining
tab.
18. Remove the passenger's side center pillar lower
trim panel:
•
Remove the front door opening trim and the
sliding door opening trim around the center
pillar lower trim panel.
•
Slide the lower anchor cover upward, and
remove the front seat belt lower anchor bolt.
•
Gently spread open the top of the center pillar
lower trim panel to release the two retaining
tabs; then release the three clips, and remove
the lower trim panel. Take care not to damage
the clips and retaining tabs.
SLIDING DOOR
OPENING TRIM
FRONT SEAT BELT
UPPER ANCHOR BOLT
TORQUE: 32 N•m (24 lb-ft)
(Note the sequence of washers.
Tape the washers together to
prevent them from being disrupted.)
