© 2001 American Honda Motor Co., Inc - All Rights Reserved.
AII 22054 (0104)
3 of 14
6.
Remove the center panel:
•
Move the gear selector to the D1 position.
•
Using a small flat-tip screwdriver wrapped
with a shop towel, gently pry out and remove
the plastic cover.
•
Reach inside the cover hole, and gently pull
along the bottom to release the lower clips;
then work toward the top to release all 10
clips.
•
Pull out the console panel, unplug the
connectors and remove it.
7.
Remove the radio (four bolts, and unplug the
radio connector and the antenna lead). If
equipped, remove the navigation unit (six
screws, and unplug the connectors and the
antenna lead).
CONNECTORS
CLIP
CONSOLE
PANEL
TAB
PLASTIC
COVER
SMALL
FLAT-TIP
SCREWDRIVER
CONSOLE
PANEL
CONNECTORS
NAVIGATION UNIT
TAB
CLIP
ANTENNA LEAD
RADIO
CONNECTOR
BOLTS
NAVIGATION UNIT
SCREW
ANTENNA
LEAD
SCREWS
With Navigation Unit:
Without Navigation Unit:
With Navigation Unit:
Without Navigation Unit:
CONNECTORS
