Honda GOLDWING GL1800, Service Manual

Page: 99 / 757

MAINTENANCE
3-2
MAINTENANCE
SERVICE INFORMATION
SPECIFICATIONS
TORQUE VALUES
ITEM SPECIFICATIONS
Throttle grip free play 2 – 6 mm (1/12 – 1/4 in)
Spark plug Standard BKR6E-11 (NGK), K20PR-U11 (DENSO)
For cold climate (below 5
°
C/41
°
F) BKR5E-11 (NGK), K16PR-U11 (DENSO)
For extended high speed riding BKR7E-11 (NGK), K22PR-U11 (DENSO)
Spark plug gap 1.00 – 1.10 mm (0.039 – 0.043 in)
Valve clearance Intake 0.15
±
0.03 mm (0.006
±
0.001 in)
Exhaust 0.22
±
0.03 mm (0.009
±
0.001 in)
Recommended engine oil Pro Honda GN4 or HP4 (without molybdenum
additives)
4-stroke oil or equivalent motor oil
API service classification: SG or higher
JASO T 903 standard: MA
Viscosity: SAE 10W-40
Engine oil capacity After draining 3.6 liters (3.8 US qt, 3.2 Imp qt)
After draining/filter change 3.7 liters (3.9 US qt, 3.3 Imp qt)
After disassembly 4.6 liters (4.9 US qt, 4.0 Imp qt)
Final drive oil
capacity After draining
120 cm
3
(4.1 US oz, 4.2 Imp oz)
After disassembly
150 cm
3
(5.1 US oz, 5.3 Imp oz)
Recommended brake fluid DOT 4 brake fluid
Recommended clutch fluid DOT 4 brake fluid
Cold tire pressure Up to 90 kg (200 lbs) load Front
250 kPa (2.50 kgf/cm
2
, 36 psi)
Rear
280 kPa (2.80 kgf/cm
2
, 41 psi)
Up to maximum weight
capacity Front
250 kPa (2.50 kgf/cm
2
, 36 psi)
Rear
280 kPa (2.80 kgf/cm
2
, 41 psi)
Tire size Front 130/70R18 (63H), 130/70R18M/C (63H)
Rear 180/60R16 (74H), 180/60R16M/C (74H)
Tire brand Front D250F (Dunlop), G707 RADIAL (Bridgestone),
G709 RADIAL (Bridgestone)
Rear D250 (Dunlop), G704 RADIAL (Bridgestone)
Minimum tread depth Front 1.5 mm (0.06 in)
Rear 2.0 mm (0.08 in)
Cylinder head side cover bolt 10 N·m (1.0 kgf·m, 7 lbf·ft)
Spark plug 18 N·m (1.8 kgf·m, 13 lbf·ft)
Cylinder head cover bolt 12 N·m (1.2 kgf·m, 9 lbf·ft)
Timing hole cap 18 N·m (1.8 kgf·m, 13 lbf·ft) Apply grease to the threads.
Engine oil drain bolt 34 N·m (3.5 kgf·m, 25 lbf·ft)
Engine oil filter cartridge 26 N·m (2.7 kgf·m, 20 lbf·ft) Apply oil to the seal rubber and threads.
Final drive oil filler cap 12 N·m (1.2 kgf·m, 9 lbf·ft)
Final drive oil drain bolt 20 N·m (2.0 kgf·m, 14 lbf·ft)
Front brake reservoir cap screw 2 N·m (0.2 kgf·m, 1.4 lbf·ft)
Clutch reservoir stopper plate screw 2 N·m (0.2 kgf·m, 1.4 lbf·ft)