Operating System Software
Installation guide
New Operating System Software for VRM 6200
B45.03.070822
How to perform the update
The files required for the update are stored as compressed data in a Zip file for free download
from. Once unpacked the files provide a so-called OS image which shall be copied to an empty
CD-ROM into its root directory
Note:
Do not add, modify or delete any files
Please follow the below-mentioned steps:
§
Download the Zip file "B45-03-070822.zip" to the HDD of your computer
o
Unzip the file into an empty folder
Note
: Do not use other decompression software than WinZip since it may cause errors
§
If not already available, create MP3 files in a total capacity of min. 45MB
Note
: Due to the very small file size of the OS image, the MP3 files are required to keep
VRM 6200 DVD drive spinning.
§
Insert an empty CD-ROM to your PC's CD-ROM writer
§
Start your CD burning software.
o
Create a folder "MP3" in the root directory of the CD-ROM
o
Copy the MP3 files into the folder "MP3"
o
Copy the OS image files into the root directory of the CD-ROM
o
Start burning
Note
: Recommended writing speed = x8
Disc status = Close session
§
Power on VRM 6200 and insert the completed disc. The disc will now be read.
§
On appearance of the selection screen chose "MCU". The update process will start automatic.
Note
: Do not turn off power! The unit will perform an auto-restart after approx. 2min.
§
After re-start, remove and re-insert disc.
§
On appearance of the selection screen chose "MPEG". The update process will start automatic.
Note
: Do not turn off power! The unit will NOT perform an auto-restart
§
After approx. 3min. the "VDO Dayton" screen appears and stays. Now power-off VRM 6200.
§
Power on again and remove disc.
§
Power off again. The update is now finished!