76
uu
Indicators
u
In
strum
e
nt Pa
nel
*1:Models with the smart entry system have an
ENGINE START/STOP
button instead of an ignition switch.
Indicator
Name
On/Blinking
Explanation
Message
*
System
Message
Indicator
*
●
Comes on for a few seconds when you
turn the ignition switch to ON
(
w
*1
, then
goes off.
●
Comes on along with a beep when a
problem is detected. A system message on
the multi-information display appears at
the same time.
●
While the indicator is on, press the
(information) button to see the
message again.
●
Refer to the Indicators information in
this chapter when a system message
appears on the multi-information
display. Take the appropriate action for
the message.
●
The multi-information display does not
return to the normal screen unless the
warning is canceled, or the
button is pressed.
—
Turn Signal
and Hazard
Warning
Indicators
●
Blinks when you operate the turn signal
lever.
●
Blink along with all turn signals when you
press the hazard warning button.
●
Does not blink or blinks rapidly
- A
turn signal light bulb has blown.
Change the bulb immediately.
2
Replacing Light Bulbs
P. 531, 533,
534
—
High Beam
Indicator
●
Comes on when the high beam headlights
are on.
—
—
Lights On
Indicator
●
Comes on whenever the light switch is on,
or in
AUTO
when the exterior lights are
on.
●
If you remove the key from the ignition
switch
*1
while the exterior lights are on,
a chime sounds when the driver's door
is opened.
—
* Not available on all models
16 US ACCORD 4D (KA KC KL)-31T2A6300.book 76 ページ 2015年7月23日 木曜日 午後5時0分