uu
When Driving
u
Vehicle Stability Assist (VSA
®
), aka Electronic Stability Control (ESC), System
472
Driving
This button is on the driver side control panel.
To partially turn the VSA features on and off,
press and hold it until you hear a beep.
The traction control stops fully functioning,
allows the wheels to spin more freely at low
speed. The VSA
®
OFF indicator will also come
on.
To turn it on again, press the
(VSA
®
OFF
)
button until you hear a beep.
VSA
®
is turned on every time you start the
engine, even if you turned it off the last time
you drove the vehicle.
■
VSA
®
OFF Button
1
Vehicle Stability Assist (VSA
®
), aka Electronic Stability Control
(ESC), System
With the
button pressed, your vehicle will have
normal braking and cornering ability, but VSA
®
traction and stability enhancement becomes less
effective.
In certain unusual conditions when your vehicle gets
stuck in shallow mud or fresh snow, it may be easier
to free it with the VSA
®
temporarily switched off.
When the
button is pressed, the traction control
function becomes less effective. This allows for the
wheels to spin more freely at low speed. You should
only attempt to free your vehicle with the VSA
®
off if
you are not able to free it when the VSA
®
is on.
Immediately after freeing your vehicle, be sure to
switch VSA
®
on again. We do not recommend driving
your vehicle with the VSA
®
system switched off.
You may hear a motor sound coming from the
engine compartment while system checks are being
performed immediately after starting the engine or
while driving. This is normal.
VSA
®
OFF
Indicator
16 US ACCORD 4D (KA KC KL)-31T2A6300.book 472 ページ 2015年7月23日 木曜日 午後5時0分