138
Co
ntrols
Opening and Closing the Moonroof
*
You can only operate the moonroof when the ignition switch is in ON
(
w
*1
. Use the
switch in the front of the ceiling to open and close the moonroof.
■
Automatic operation
To open:
Pull the switch back firmly.
To close:
Push the switch forward firmly.
The moonroof will automatically open or close
all the way. To stop the moonroof midway,
touch the switch briefly.
■
Manual operation
To open:
Pull the switch back lightly, and
hold it until the desired position is reached.
To close:
Push the switch forward lightly, and
hold it until the desired position is reached.
■
Tilting the moonroof up
To tilt:
Push on the center of the moonroof
switch.
To close:
Push the switch forward firmly,
then release.
*1: Models with the smart entry system have an
ENGINE START/STOP
button instead of an
ignition switch.
■
Opening/Closing the Moonroof
1
Opening/Closing the Moonroof
NOTICE
Opening the moonroof in below freezing
temperature or when it is covered with snow or ice
can damage the moonroof panel or motor.
The power moonroof can be operated for up to 10
minutes after you turn the ignition switch off.
Opening either front door cancels this function.
When resistance is detected, the auto reverse
function causes the moonroof to change directions,
then stop. Auto reverse stops sensing when the
moonroof is almost closed to ensure that it fully
closes. Make sure that all objects, including fingers,
are clear of the moonroof.
3
WARNING
Opening or closing the moonroof on
someone's hands or fingers can cause
serious injury.
Make sure all hands and fingers are clear of
the moonroof before opening or closing it.
Open
Close
Tilt
* Not available on all models
16 US ACCORD 4D (KA KC KL)-31T2A6300.book 138 ページ 2015年7月23日 木曜日 午後5時0分