532
uu
Replacing Light Bulbs
u
Front Side Marker Light Bulbs
Main
tenan
ce
Front Side Marker Light Bulbs
When replacing, use the following bulbs.
1.
Turn the steering wheel all the way to the
opposite side from the light being replaced.
Passenger side:
Turn the steering wheel
to the left.
Driver side:
Turn the steering wheel to the
right.
2.
Remove the holding clips and screw, and
pull the inner fender back.
3.
Turn the socket counter-clockwise and
remove it.
4.
Remove the old bulb and insert a new bulb.
Front Side Marker Light: 3 CP
Models with LED headlights
1
Front Side Marker Light Bulbs
Insert a flat-tip screwdriver, lift and remove the center
pin to remove the clip.
Insert the clip with the center pin raised, and push
until it is flat.
Center pin
Push until the
pin is flat.
Screw
Holding Clip
Bulb
Socket
16 US ACCORD 4D (KA KC KL)-31T2A6300.book 532 ページ 2015年7月23日 木曜日 午後5時0分