581
uu
Fuses
u
Inspecting and Changing Fuses
Han
d
lin
g the U
n
expected
Inspecting and Changing Fuses
1.
Turn the ignition switch to LOCK
(
0
*1
. Turn
headlights and all accessories off.
2.
Remove the fuse box cover.
3.
Check the large fuse in the engine
compartment.
u
If the fuse is blown, use a Phillips-head
screwdriver to remove the screw and
replace it with a new one.
4.
Inspect the small fuses in the engine
compartment and the vehicle interior.
u
If there is a burned out fuse, remove it
with the fuse puller and replace it with a
new one.
*1: Models with the smart entry system have an
ENGINE START/STOP
button instead of
an ignition switch.
1
Inspecting and Changing Fuses
NOTICE
Replacing a fuse with one that has a higher rating
greatly increases the chances of damaging the
electrical system.
Replace fuse with a spare fuse of the same specified
amperage.
Confirm the specified amperage using the charts on
P. 578 to 580.
There is a fuse puller on the back of the engine
compartment fuse box cover.
Combined
Fuse
Blown Fuse
Fuse Puller
16 US ACCORD 4D (KA KC KL)-31T2A6300.book 581 ページ 2015年7月23日 木曜日 午後5時0分