529
Continued
Main
tenan
ce
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.
1.
Unlock the holding clips, then remove the
upper part of the air intake duct and the air
intake tube.
1.
Remove the reserve tank.
High beam headlight: LED type
*
High beam headlight: 60 W (HB3 for halogen bulb type)
*
Low beam headlight: LED type
*
Low beam headlight: 55 W (H11 for halogen bulb type)
*
1
Headlight Bulbs
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the trunk or tow a trailer, have the
aiming readjusted at a dealer or by a qualified
technician.
When replacing a halogen bulb, handle it by its base,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Models with halogen headlights
All models
Models with halogen headlights
■
High Beam Headlights
1
High Beam Headlights
High beam headlights are LED type. Have an
authorized Honda dealer inspect and replace the light
assembly.
Models with LED headlights
Models with halogen headlights
Tube
Holding Clip
Holding Clips
Driver side
6-cylinder models
Passenger side
All models
* Not available on all models
16 US ACCORD 4D (KA KC KL)-31T2A6300.book 529 ページ 2015年7月23日 木曜日 午後5時0分