Continued
133
uu
Security System
u
Security System Alarm
Co
ntrols
■
Setting the security system alarm
The security system alarm automatically sets when the following conditions have
been met:
•
The ignition switch is in LOCK
(
0
*1
, and the key has been removed from the
ignition switch.
•
The hood and trunk are closed.
•
All doors are locked from outside with the key, the remote transmitter, or smart
entry system.
■
When the security system alarm sets
The security system alarm indicator in the instrument panel blinks. When the
blinking interval changes after about 15 seconds, the security system is set.
■
To cancel the security system alarm
The security system alarm is canceled when the vehicle is unlocked using the remote
transmitter, smart entry system, or the ignition switch is turned to ON
(
w
*1
. The
security system indicator goes off at the same time.
*1: Models with the smart entry system have an
ENGINE START/STOP
button instead of an
ignition switch.
1
Security System Alarm
Do not set the security system alarm when someone
is in the vehicle or a window is open. The system can
accidentally activate when:
•
Unlocking the door with the lock tab.
•
Opening the trunk with the trunk release or the
emergency trunk opener.
•
Opening the hood with the hood release.
•
Moving the shift lever out of
(
P
.
If the battery goes dead after you have set the
security system alarm, the security alarm may go off
once the battery is recharged or replaced.
If this occurs, deactivate the security system alarm by
unlocking a door using the key or remote transmitter.
Do not attempt to alter this system or add another
device to it.
Automatic transmission/CVT models
16 US ACCORD 4D (KA KC KL)-31T2A6300.book 133 ページ 2015年7月23日 木曜日 午後5時0分