15
Manually Test All the Stations
To manually test all the stations in sequence, turn the dial to “Run Program”. The
display will show “Prog No 1 OFF”. Press button three times.
The display will show:
Press
to change OFF to ON
and then
to run all stations
for the default run time of 2 mins per station.
The controller will start running all stations with the selected run time. The time will
decrement in the display and will sequentially move through all stations, running them
for the same set period of time. This option is designed so that it is possible to test all
sprinklers and valves that make up the irrigation design.
To fast skip to the next station press the
button. To stop the system test, change
the position of the main dial, to “OFF”.
HINT: If you wish to alter the default value from 2 mins to some other value and set
this as the new default time, press the
when you are in “Sys Off”.Then alter the
run time using the
or
buttons. Once the new default time is set, Press
the
button again, and the new default will now always appear when you select a
“manual system test”.
MANUAL OPERATIONS
STATION
Summary of Contents for DIAL EZY GARDENER
Page 8: ...6 SPARE WATERING PLANNER 5 6 ...
Page 34: ...32 SPARE WATERING PLANNER 5 6 ...
Page 35: ...33 SPARE WATERING PLANNER 5 6 ...
