Holman DIAL EZY GARDENER Instruction Manual Download

Page: 3 / 36

Dial Ezy Gardener

is available in 4 and 6 station configurations. Designed

to cover a wide range of applications from residential and commercial turf, to light

agriculture, and professional nursery.
This controller has a possible 3 separate programs with up to 12 starts per day.

The controller has a 7 day watering schedule with individual day selection per

program or a 365 calendar for odd/even day watering or selectable interval watering

schedules from every day to every 15th day. Individual stations can be allocated to

one or all programs and can have a run time of 1 minute to 12 hours 59 minutes or 25

hours if the water budget is set to 200%.
Holman has always been concerned with sustainable water usage. The controller

has many water saving features that can be used to maintain the highest standard

of plant quality with the least amount of water consumption. The integrated budget

facility allows global changes of run times without affecting programmed run times.

This allows for decreasing total water consumption on days of minimal evaporation.

INTRODUCTION

Summary of Contents for DIAL EZY GARDENER





































Search results

Summary of Contents for DIAL EZY GARDENER

Reviews:

Related manuals for DIAL EZY GARDENER

Brands by name

Popular brands

Holman DIAL EZY GARDENER, Instruction Manual

Search results

Summary of Contents for DIAL EZY GARDENER

Reviews:

Related manuals for DIAL EZY GARDENER

Brands by name

Popular brands