background image

3

KEY FEATURES

 4 & 6 station models.

 Toroidal high capacity transformer rated to 1.25AMP (30VA):

 Outdoor model with an inbuilt transformer includes lead & plug.

 3 programs, each of which has 4 start times. Maximum of 12 start times per day.

 Station run times from 1 minute to 12 hours & 59 minutes.

 Selectable watering options:

   - Individual 7 day selection.

   - Even, Odd or Odd -31.

   - Interval watering day selection from every day to every 15th day.

 Watering budgeting feature allows quick adjustment of the station run times by    

   percentage, from 10% to 200%.

 Rain sensor input will turn off all stations or selected stations during wet periods, if a  

   sensor is installed.

 Permanent memory feature will retain automatic programs during power failures.

 Standard 9 volt block alkaline battery can be used to program the controller    

   remotely without AC power.

 Manual functions:

   - Run a program or group of programs once.

   - Run a single station, with current AMPS testing feature.

   - Run a test cycle for all stations.

   - “OFF” position, stops a watering cycle or to stop automatic programs during 

      winter.

 Pump or master valve input is standard.

 Real time clock backed up with 3V Lithium battery (pre-fitted)

 Current sensing and faulty station skip

Summary of Contents for DIAL EZY GARDENER





































Reviews: