aWnIngS
Manual Patio Awning
CAUTION:
Always use the pull strap to extend or retract the awning. Do not extend or
retract the awning by using rafter arms. Serious injury could occur if
hands or fingers become pinched in awning hardware.
INFORMATION:
Refer to the awning OEM manual for more detailed information and operating instructions.
Extending the Awning:
1. Squeeze travel lock to disengage lock securing inner and outer rafter arms together. Repeat for other
side.
2. Place awning brake lever to Roll Down position using awning pull rod.
3. Loosen lock knob on inner rafter. Repeat for other side.
4. Hook pull strap with pull rod then extend awning full distance.
5. Hook inside rafter to top of outer rafter. Repeat for the other side.
6. Unlock arm latch then raise outside rafter to desired height. Allow arm latch lock pin to engage with hole in
rafter. Repeat for other side.
7. Pull down on awning to remove slack from fabric then tighten inner rafter lock knob.
CAUTION:
Use inner rafter to brace the awning in the extended position. Do not extend outer rafter beyond
maximum point indicated by warning label.
Squeeze lock to
disengage.
031262c
Step 1
031262e
Brake Lever
Step 2
031262f
Inner rafter
Step 3
Step 4
020001c
031262d
Engage hook of inner rafter
to top of outer rafter
Step 5
031262f
Step 6
