Title
Drawing
NO
Area Designer
Instruction Manual
C-41-02495
25
／
51
4.2.1.2.3.1 Numerical input of Independent
Fig. 4.2.1.2.3.1-1 illustrates the default state of numerical input screen when
selecting the rectangle independent shape. Output on the main view is
displayed as illustrated in Fig. 4.2.1.2.1.
As In Fig. 4.2.1.2.3.1-1, rectangle is configured of 4 points therefore four
rows will be displayed. With using a polygon, the default state of numerical
input value is configured of one point and one row will be displayed. If using an
arc shape, it is configured of 2 points, and then two rows will be displayed.
Fig 4.2.1.2.3.1-1
Example of default state of Numerical input screen
during independent rectangle selection
(Left: XY Coordinates, Right: Polar Coordinates)
With using a polygon shape, when a point is deleted, the ID of that corresponding
point is deleted and ID assigned after the deleted point ID is decreased by one. If a
rectangle or arc has been selected, ID will be assigned in order of smaller step.
By changing the values of the XY coordinates or the value of the polar coordinates
of each point ID in numerical input screen, the output will be displayed in the main
view. In Fig. 4.2.1.2.3.1-2 shows an example of arc configuration by numerical input.
Fig 4.2.1.2.3.1-2 Example of arc configuration by numerical input
