Title
Drawing
NO
Area Designer
Instruction Manual
C-41-02495
35
／
51
4.5 IO Simulation
This simulation is used to tests the IO information of the sensor. While sensor is
connected, change into monitoring screen, in the menu bar View → Mode→ [
/ IO
Simulation] and the
icon in the toolbar switch will be active. Click the icon or the
shortcut keys of “Ctrl + Alt + I” and the window illustrated in Fig. 4.5-1 will be displayed. The
“
/ Apply” icon is used to apply the configurations of the simulation to the sensor and
starts test.
Fig
4.5-1 IO Simulation
[In case of input/output simulation test]
1.
This shows when a check mark is placed in the input simulation checkbox or the output
simulation for which to perform the test. When check mark is placed, as illustrated in
Fig. 4.5-2,
the
Numerical input checkbox and the buttons will be active.
Fig
4.5-2 Display when the check box of input simulation is active
