Title
Drawing
NO
Area Designer
Instruction Manual
C-41-02495
48
／
51
5.2.2 Connections tool
Table
5.2.2 Connection tool
Icon
Name
Shortcut
Description
Serial COM Port
Display the COM port which has been
connected.
Rescan
Rescan the serial COM port and redisplay
the connected COM port number.
Select baud rate
Display the RS422 baud rate value.
Connect device
Ctrl+Shift+C
Connects to COM port and communication
takes place.
Disconnect device
Ctrl+Shift+D
Disconnect the communication.
Sensor information
Ctrl+Shift+I
Display sensor information.
Read from sensor
Ctrl+Shift+R
Read the settings from the sensor.
Write to sensor
Ctrl+Shift+W Write settings to the sensor.
5.2.3 Mode selection tool
Table 5.2.3 Mode selection tool
Icon
Name
Shortcut
Description
Edit
Ctrl+Alt+E
Change/Switch to edit mode.
Monitor
Ctrl+Alt+M
Change/Switch to monitor mode.
Sensor settings
Ctrl+Alt+S
Display sensor settings.
IO Simulation
Ctrl+Alt+I
Display IO Simulation.
5.2.4 Measurement display tool
Table 5.2.4 Measurement display tool
Icon
Name
Shortcut
Description
Play
Ctrl+0
Display the measurement data.
Hide
Ctrl+0
Hide the measurement data.
Record
Ctrl+1
Record log data.
Replay
Ctrl+2
Play log data.
□
In the event you want to confirm order the detection judgment order of the area when
playing a log, it is necessary to open the original project file used while recording the
log data. Make sure to save the project file.
Caution
