Title
Drawing
NO
Area Designer
Instruction Manual
C-41-02495
36
／
51
2.
Specify the IO value by changing the numerical value on the left or click on the IO lamp
on the right, to configure the details of specific IO state. When the numerical value of
the left is changed, the lamp on the right will automatically switch ON /OFF such that
they are in the same IO state. Also, when the IO state of the lamps on the right are
changed, the numerical values on the left will also change automatically.
Fig 4.5-3 Input simulation numerical input and lamps
3. If Apply is clicked then IO test starts.
[In case of fault simulation test]
1.
Click Fault simulation, confirm the lamp turns green.
Fig 4.5-4 In the state of fault simulation lamp is led.
2.
If Apply is clicked then test starts.
