Title
Drawing
NO
Area Designer
Instruction Manual
C-41-02495
18
／
51
□
Maximum 30 points can be configured with a polygon.
□
When an area is configured with more than 31 points, first write the area into the sensor
and then read the area from the sensor, as shown in Fig. 4.2.1.2.1.1-3; the points will be
displayed in all steps within the configured area. Although it is possible to write an area
with more than 31 points to configure into the sensor, the writing of point information on
the area cannot be guaranteed. In the event an area with more than 31 points, the
maximum number of points that can be displayed in the main view is the maximum
number of steps of the 1 point.
Fig
4.2.1.2.1.1-2
Left: Example of 30 points or less within the area
Right: Display an area of 30 points or less when read from the sensor
Fig 4.2.1.2.1.1-3 Left: Example of more than 31 points within the area
Right: Display an area of more than 31 points when read from the sensor
Caution
