Title
Drawing
NO
Area Designer
Instruction Manual
C-41-02495
24
／
51
4.2.1.2.3 Numerical input
In this section it will explain how to configure the area by numerical input of XY
coordinates and polar coordinates for independent shapes and dependent
shapes separately.
When configuring the area, ID position information is assigned to each point
coordinate. Point ID is displayed in the Pt column of numerical input. After
selecting a point when the mouse is placed on the main view, the tool tip of the
selected point ID will be displayed as illustrated in Fig. 4.2.1.2.3. Displayed tool tip
is the point ID number.
Fig 4.2.1.2.3 Point ID assigned to each point
The point ID is assigned in order to identify the coordinate position information of
each point (here the coordinate position information of point will be referred to as
point information). The point ID starts from 1 up to maximum 541.
The coordinates X, Y and the radius of arc for numerical input is displayed in [mm]
units and the angle is displayed in [deg] units.
In order to correct the positions of the points coordinates, double click on the area
which you want to change. Input the changed value, move to other cell or press the
enter key. When the change is completed, the changed output will be displayed on
the main view.
□
Maximum of 30 points is guaranteed while writing a polygon shape into the sensor. Although
31 or more points can be written into the sensor of polygon shape, it cannot guarantee
the point’s information.
□
While the numerical input row is selected with a blue display, the delete or backspace key
can be pressed and the point information of that row will be deleted.
Caution
Quick/Useful tips
