BA_PH_245-20_EN_15-22.docx
22
4.5
Hazardous Areas
Hazard
Area/Action
Risk
Avoidance
Cutting Hazard
At the tool
•
When changing
the cutter head
•
In case of contact with
the rotating cutter
Mild to severe inju-
ries to hands and
fingers
•
Wear gloves when changing
the cutter.
•
Keep hands out of the danger
zone.
•
Use all available tool covers
and fence bridges.
•
Do not push workpieces along
the unsecured cutter by hand.
•
Use a power feeder or sliding
block.
Risk of Kickback
Danger of
being drawn in
At the tool
•
When the splinter tabs
are widely spaced apart!
•
Increased risk of Kick-
back when tilting the
workpiece!
•
Increased risk of Kick-
back with incorrectly se-
lected cutting or rotat-
ing speed!
•
Increased risk of Kick-
back when insert mill-
ing!
•
Increased risk of Kick-
back and draw-in during
climb milling!
•
Increased risk of draw-in
due to rotation of the
cutter!
Increased risk of in-
jury or even death
from ejected or fly-
ing workpieces,
workpiece parts
and tool parts (e.g.
in the event of tool
breakage).
Increased risk of in-
juries or even death
due to entrapment
of hands, fingers,
clothing, jewellery
and long hair.
•
Use all available tool covers
and fence bridges.
•
Do not push workpieces along
the unsecured cutter by hand.
•
Use a power feeder or sliding
block.
•
Use an anti-kickback device
(also for test cuts!) and add a
clamping device if necessary.
•
The values in the cutting speed
table must be observed.
•
Never wear gloves while the
milling spindle is running.
•
Wearing watches, jewellery
and long hair are prohibited!
•
Wear tight-fitting clothes and
hairnet if necessary.
Electric Shock
Hazard
On the electrical system
and all current-carrying
components.
Electric shocks with
an increased risk of
injury up to death
•
Avoid wetness / moisture
•
Have defective parts, cables
and insulation repaired imme-
diately (only by qualified per-
sonnel!)
•
Do not touch energised com-
ponents
•
Switch off and lock the main
switch or disconnect the ma-
chine from the mains during
any maintenance or repair
work.
