HOKUBEMA PANHANS 245-20, Operating Manual

Page: 64 / 69

BA_PH_245-20_EN_15-22.docx
64
20 Options and Accessories
In the following tables you will find available options and accessories to upgrade your machine. You can find
general spare parts in our online shop on

https://www.hokubema.com .
Use only the tools, accessories and spare parts specified by the manufacturer. The use of other
tools, accessories or spare parts may cause injury to persons and damage to the machine. The
manufacturer accepts no liability for any damage resulting from the use of tools, accessories
or spare parts not specified by the manufacturer or from additional components supplied by
third parties!
20.1 Technical Extensions
Article Description Art. No.
CONTROL PANEL ON TOP Ergonomic and user-friendly, controls always at eye level, mounted on
the right-hand side behind the tabletop, instead of the control panel
mounted below.
4632
ZEROMASTER Calibration device for exact zero point height setting from the milling
tool to the table top.
2205
SWIVEL RANGE OF THE
S/- 45,5°
Instead of +45.5° to -5° for the standard model. 4541
MOTOR Motor 7.5 kW (10 HP) instead of 5.5 kW. 4271
20.2 Table Systems
Article Description Art. No.
TURNTABLE This allows the milling fence type 216 to be rotated 360° on the ma-
chine tables with 1100 x 760 mm table top.
4466
SLIDE PLATE FOR TABLE
TOP 1100 X 760 MM
With coated surfaces. For fast, comfortable and tool-free adjustment
to different tool diameters up to max. 240 mm, incl. front table insert
with quick lock up to tool diameter 155 mm and rear insert for closing
the table opening. Can be used instead of the standard table insert
rings (not in combination with rotary table art. no. 4658).
4467
SLIDE PLATE FOR TABLE
TOP 1340 x 800 MM
Similar to Art. No. 4467, but for larger table (availability on request!) 4660
EXTENDABLE
FRAME SUPPORT
FOR TABLE TOP
1100 X 760 MM
Total length approx. 1375 mm, extension depth approx. 892 mm from
the centre of the milling spindle, smooth-running, guided in separate
bearing blocks on the side of the machine table.
4232
TABLE EXTENSION
ON BOTH SIDES
For table top 1100 x 760 mm , Total length 2300 mm, consisting of 2
pieces of finely planed cast iron table tops as extension each on the
left and right of the standard machine table, with smooth-running
frame support approx. 892 mm, extendable to the front.
4465
TABLE EXTENSION
ON BOTH SIDES
For table top 1340 x 800 mm , Total length 2500 mm, consisting of 2
pieces of finely planed cast iron table tops as extension each on the
left and right of the standard machine table, with smooth-running
frame support approx. 970 mm, extendable to the front
4215
Continuation see

next page