BA_PH_245-20_EN_15-22.docx
55
16.11
Cross-Cut Fence LAS-M
Figure 55: Length stop LAS-M
Right-hand version for system tools with a use-
ful length of 1750 mm. Ideal for machining
workpieces in pairs.
Slider system with multiple stop and 3 adjust-
ing rings for cross-cut positioning with a split-
ter tongue.
Article number see section
16.11.1
Extension for Cross-Cut Fence LAS-M
The cross-cut fence LAS-M can be additionally upgraded with an extension. The total length is 1000 mm with a
useful length of 1750 to 2750 mm. Article number see section
16.12
Roller Table
Figure 56: Roller table
The optional roller table has a stop fixture, an
eccentric clamp as well as a clamping table
with an insertion up to the milling spindle.
Thanks to the stepped height adjustment, the
upper position serves as a roller table and the
lower position as a table extension on the left
side of the machine.
Included is the protective cover type 1641 (as
shown in section
16.9.4) and a suction noz-
zle Ø 120 mm.
Remark:
This option is only possible in combi-
nation with the optional 1340 x 800 mm tab-
letop and in addition possibly with a tabletop
extension.
Article number see section
