[30]
□
Step 10: AC Line Wiring
– The AC Line Cable has three black wires with JST pins. The common end has a
yellow crimp terminal, place this terminal at the left edge of the power supply plate.
1.
Put the JST pin on the shortest wire in CN1 Pin 3 – AC Line of the power supply in the lower left of the
power supply plate.
2.
Put the JST pin on the middle length wire in CN1 Pin 3 – AC Line of the power supply in the upper left
of the power supply plate.
3.
Put the JST pin on the longest wire in CN1 Pin 3 – AC Line of the power supply in the upper right of the
power supply plate.
□
Step 11: AC Switch Wire
– The AC Switch wire is a single conductor with blue crimp terminals on either
end. Place it with one end near each of the yellow crimp terminals. No connections are made at this time.
