[26]
Notice, the capacitors you are about to install are polarized meaning that they have positive and negative terminals.
Unfortunately the capacitors can be inserted into the PCB in either direction potentially creating the situation where
one or both capacitors are installed backwards. This would be bad; please observe the capacitor polarity when
inserting the capacitors into the PCB and recheck that they are correct before soldering.
Assembly Instructions
□
Step 1: C201
: Insert C201, the 10000 uF, 80V, capacitor into the
power board with the negative side of the cap closest to the edge of
the PCB.
DO NOT SOLDER AT THIS TIME.
□
Step 2: C206:
Insert C206, the 1000 uF, 63V, capacitor into the
power board with the negative side of the cap closest to the ‘C206’
marking on the PCB.
DO NOT SOLDER AT THIS TIME.
