[24]
□
Step 20: Side Panels –
Get two of the extruded side panels and use 6 #4-40 X ¼” flat head screws to attach
the side panels to the top of the RF Deck Panel, use thread-locker if available.
In run 1 of the amp the counter
sink is on the wrong side of the panel. In this case there is plenty of clearance for the flat head screws and we
decided to assemble the amps using the panels as built. The screws are not visible once the amp is assembled.
The assembly is now complete; the amp deck will be added later. Place the assembly in a safe place to avoid
potentially scratching the side panels.
