6. Interior structure
51
Converting into a wider bed
Widening the beds
Bed Extension for Single Beds
*
Converting the bed extension
• Lift up the bedside table
j
and remove it.
• Pull on the handle
k
and pull out the slatted frame fully to a
horizontal position.
• Insert the mattresses
l
to expand the beds.
The extension for widening the beds can carry a max.
of 100 kilos.
Only place loads on the bed extension when it has been
pulled out completely and the mattresses have been
laid in place.
While driving, the bedside table must be stored under
bed frames. Otherwise, the bedside table might move
when braking suddenly and damage the interior of the
caravan.
If the night table is placed back on its base, it must be
fitted to the retaining plate
m
in such a manner that it
cannot slip.
1
2
4
3
Drop down bed with cable pull technology
(515 UHK/515 UHL)
• If necessary, remove the backs from the seating area.
• Switch off the lighting underneath the alcove bed.
• Release the lock for the drop down bed by holding the knob
j
firmly pressed.
• Use the handle
k
to pull the drop down bed to the desired posi
-
tion (but no further down than it will go).
• Hang the ladder (stored in the wardrobe when the caravan is deli
-
vered) over the handle
k
.
• When sleeping, always clip the netting that protects you from fal
-
ling out
l
into place (located underneath the mattress).
When returning the bed to its storage position, ensure
that the fabric facing on the sides does not slip out and
behind the bed, where it would get caught in the mecha
-
nical system.
When the caravan is not in use, lower the bed some
-
what or remove the mattress from the drop down bed
to ensure there is enough air circulation in this area of
the vehicle.
Drop down bed above the seating area
Drop down bed with netting to prevent people
from falling out
3
Maximum load for the Drop down bed:
200 kilos
• Before driving, return the bed to its original upright position and
lock it into place.
2
1