91
7. Installation of electrical
devices
7.4 Electrical supply
An electrical supply to the caravan can be obtained from the
following connections:
- 230 V mains connection 50 Hz
- via the tow vehicle if it is connected using the 13-pole plug
(limited functions)
- via a built-in battery
*.
Everything that uses 12 V, such as ligh
-
ting, water pump, etc., will work.
Supply via mains hook up
The caravan receives its electric power supply via the 230 V CEE
feeder plug on the side wall of the caravan.
CEE external socket
To disconnect the electric connection
• Switch off the automatic circuit breaker
l
by pressing the
rocker button down
m
.
• Remove the CEE connector plug
k
.
• Press the cover flap
j
down until it clicks into place.
Automatic circuit breaker with FI ('fast interrupt')
switch
Only plugs and cords that comply with CEE stan
-
dards must be used.
To connect to a mains hook up point
• Pull out the 13-pin plug that connects to the tow vehicle.
• Switch off the automatic circuit breaker
l
by pressing the
rocker button down
m
.
• Take hold of the bottom of the cover flap of the CEE external
socket
j
and pull it up
(see Chapter 5.2 Cover Flaps)
.
• Completely unwind the mains cable.
• Open the cap of the CEE connector plug by pulling it up in a
90° angle.
• Insert the plug
k
until it locks into place.
• Switch the automatic circuit breaker
l
back on.
Connected 230V hook up
1
2
4
3
Always first unhook the caravan from the car before
setting up the 230V mains connection.
