78
7. Installation of electrical
devices
General information on using the HobbyConnect system
Access data and user settings are administered via the Hobby dealer.
- Contact your dealer if your user data should change.
- Treat your access code (MyHobby Code) with the strictest con
-
fidence. Anyone who has this access code can take over the
remote control of the connected components. Report the loss of
the access code immediately to your dealer.
- Make note of any changes in the user settings and user accounts
when purchasing or selling a vehicle that has been equipped with
the HobbyConnect system.
- Please note that your device must be able to send and receive
mobile data. If this function has been deactivated or you do not
have a mobile Internet connection, the HobbyConnect system can
only be controlled via Bluetooth.
- If the contract is not extended, the components can
only be operated by remote control via Bluetooth
when standing in the near vicinity.
- To enable data to be transferred, the camper must
be located within the group of countries shown in
hatched lines on the map on page 87.
- The telephone contract runs for 12 months. Contract
extensions must be purchased.
- The SIM card no longer works after the renewal pe
-
riod has expired.
- Special m2m SIM cards are then required. These
can be obtained from the Hobby dealer.
- Your cell phone provider may charge extra if you use
an Internet connection abroad.
Default settings
First, please check whether the installed Hobby Connect Box is
connected to the micro USB connection and supplied with power.
The USB power supply cable must be connected to the Hobby Con
-
nect Box. Blinking red and green LED lights at the top left indicate
whether or not the box is working.
Connect Box
