76
7. Installation of electrical
devices
12:25
27,4°C
06.06.16
26,4°C
06.06.16
12:25
27,4°C
26,4°C
Displaying the data in the fixed header A
This menu gives an overview of the data in the fixed header A. It
is only possible to exit this menu by using the “Back” function; it
does not automatically switch back to the main menu on the control
panel.
date
time
inside temperature
outside temperature
Settings menu (for data in the fixed header A)
The date and time can be set in the Settings menu. Use the control
knob or the left and right arrows to reach the desired setting. Press
the control knob; it is then possible to change the settings by turning
the knob (right = increase setting; left = decrease setting) or by using
the “+/-” function. Press the control knob to confirm the changed
setting. Only then will it be saved.
The wake-up Alarm time is set and confirmed in the same way.
Use the “On/Off” function to activate the alarm clock. The activated
alarm clock is shown in green.
It is also possible to calibrate the indoor and outdoor temperatures
shown, as temperature effects on the sensors may lead to a deviati
-
on between the temperature displayed and the actual temperature.
The temperature display can be changed by a maximum of +/-12° C..
Exit this menu by using the “Back” function; otherwise, after one
minute, it will automatically switch back to the main menu on the
control panel.
Einstellungsmenü
Datum
Uhrzeit
Temperaturoffset
Wecker on/off
06.06.16
12:25
- 2 °C
+ 1 °C
12:25
27,4°C
06.06.16
26,4°C
Info menu on the TFT control panel
Information on the device manufacturer is shown here.
12:25
27,4 °C
06.06.16
26,4 °C
HOBBY
Hobby-Wohnwagenwerk
Ing. Harald Striewski GmbH
Harald-Striewski-Strasse 15
24787 Fockbek
Deutschland