Section 6 – Tail Boom & Rotor Assembly
Parts List
Bag 6
Boom Halves x 2
Horizontal/Vertical Fin Mount x 2
Tail Case Side Plates x 2
Horizontal Fin x1
Vertical fin x 1
Pulley Gear x 1
Pulley Gear Spacer x 2
Tail-output Shaft x 1
5 x 10 x 4 Flanged Bearings x 2
Tail Pitch Slider x 1
Tail Pitch change Lever x 1
Tail Pitch change Lever Mount x1
M3-4 Pivot Ball Studs x 1
Idler Pulley x 1
Idler Pulley Spacer x 2
Triple Bearing Tail Rotor Assm. x 1
Boom Support Ends x 4
Tail Case Cross-member x 1
M3-3 Set screws x 2
M2-8 Phillips Screws x 2
M3 Lock Nuts x 15
M3-6 Cap Head Bolts x 6
M3-10 Cap Head Bolts x 6
M3-12 Cap Head Bolts x 2
M3-18 Cap Head Bolts x 3
M3-22 Cap Head Bolt x 1
M3-35 Cap Head Bolts x 4
M2-12 Cap Head Bolts x 4
M3 Spacer x 1
Tail Rotor Blade Spacers x 4
5mm Plastic Tail Rotor Blades x 2
Parts found in box
Boom x 1
Tail Drive Belt x 1
Carbon Boom support Rods x 1
