Power Wheels 73510 Volkswagen New Beetle Owner'S Manual With Assembly Instructions Download Page 1

Page: 1 / 36

Owner's Manual

with Assembly Instructions

For Model B1512

Please read this manual and save it with your original sales receipt.

Tools needed for assembly: Phillips Screwdriver, Hammer, Slotted Screwdriver,

Adjustable Wrench and Safety Scissors (tools not included).

Use only with a Power Wheels

Type H 6 Volt Battery, Power Wheels

25 Amp Fuse and Power Wheels

Type H 6 Volt Charger (all included).

Trademarks, design patents and copyrights are used with

the approval of the owner VOLKSWAGEN AG.

Fisher-Price, Power Wheels, Power Wheels by Fisher-Price

and Power Lock are U.S. trademarks of Mattel, Inc.

Product features and decoration may vary from the picture above.

Summary of Contents for 73510 Volkswagen New Beetle





































Search results

Summary of Contents for 73510 Volkswagen New Beetle

Reviews:

Related manuals for 73510 Volkswagen New Beetle

Brands by name

Popular brands

Power Wheels 73510 Volkswagen New Beetle, Owner'S Manual With Assembly Instructions

Search results

Summary of Contents for 73510 Volkswagen New Beetle

Reviews:

Related manuals for 73510 Volkswagen New Beetle

Brands by name

Popular brands