Hobbies & Helis Gas-Her, Instruction Manual

Page: 80 / 104

Page 80 of 104
8-2A LINKAGE ASSEMBLY SPORT VERSION
No. Bag# Description Qt.
1 8 2.3 Long Ball End 28
2 8 2.3x25mm Rod 2
3 8 2.3x45mm Rod 5
4 8 2.3x70mm Rod 2
5 8 2.3x100mm Rod 3
6 8 2.3x115mm Rod 2
Rod Assembly:
All the Linkages should be assembled with dimensions measured center to center as
following:
No. Bag # Rod Description Center to Center Qty
1 2.3x25mm Rod 47 mm 2
2 2.3x45mm Rod 67 mm 2
3 2.3x45mm Rod 71 mm 3
4 2.3x70mm Rod 88 mm 2
5 2.3x100mm Rod 125 mm 3
6 2.3x115mm Rod 146 mm 2
7***** Single Servo Arm 1
8***** Double Servo Arm 3
9 HB Shim Ball 7
10 HB M2x8 Phillips Screw 7
11***** M3 Servo Phillips Screw 4
Note: The lengths of Linkages are used for reference only. Final adjustments will be needed
when you do radio setup. Look close to a ball end; you will see one side is different from the
other. One has a round marked on it. The other is just plain. When installing a ball link into a
pivot ball stud (or a shim ball) the side with a round should face away from a ball stud (or
shim ball.)