6
A
A.. Connect the three servos to the receiver
according to the manufacturer’s instructions.
B
B.. Connect the battery to the receiver switch
harness and the switch to the “battery”
socket on the receiver (the extra wire on the
switch is for charging your system).
C
C.. Connect the extension
wire to the aileron socket.
STEP 5: Connect the Servos to the Receiver
Install the remaining
servo in the plywood
aileron servo tray. Note
the orientation and
routing of the
servo wire.
STEP 7: Install the Aileron Servo
STEP 6: Install the Receiver and Battery
A
A.. Position the servos
where shown. Note
the orientation.
B
B.. Using the screws
that came with
the radio system,
attach the servos
to the tray. Do not
overtighten.
C
C.. Attach the servo
arms as shown in
the drawing.
STEP 4: Install the Servos
D
D.. Tear or cut the foam
sheet in half and wrap
the receiver and the
receiver battery.
Use two #64 rubber
bands to secure the
receiver to the top and
the battery to the bottom
of the servo tray.
Elevator
Servo
Throttle
Servo
Plywood
Servo Tray
Receiver
Battery
Unwrap the
antenna wire.
Servo Tray
Aileron
Servo
Plywood Aileron
Servo Tray
Rudder
Servo
