8
SECTION 3
SECTION 3
Fuselage Assembly
Tail and Wing Dowel Installation
Part
Part
The nylon horn
should be towards
the fuselage bottom.
Align the holes in the
fuselage with the holes
in the stab.
Insert the Stabilizer into the Fuselage.
STEP 1: Install the Horizontal Stabilizer
Insert the Fin into the fuselage. Use the
two 4-40 lock nuts along with washers
to hold the tail in place.
STEP 2: Install the Fin
STEP 3: Install the Wing Dowels
Fuselage Bottom
4-40 Lock Nut (2)
#4 Washer (2)
Actual Size
2.5 x 10mm Screw (4)
Actual Size
A
A.. Install the
window decals.
B. Use the
screwdriver to
open the
dowel holes.
C
C.. Insert the two
wood dowels
into the fuselage.
Install the Plastic
Dowel Caps.
You may need to hold one screw with a pliers
while installing the other side.
Note: Replace page 8 in
the Instruction Manual
with this page.
