Hiwin SCARA Robot RS405-LU, User Manual

Page: 31 / 125

C21UE001-2008
30
Avoid dust, oil mist, salt, metal powder or other
contaminants.
Keep away from water and high humidity.
Avoid shock or vibration.
Keep away from sources of electromagnetic
interference.
Placement at a higher altitude will result in
reduced performance.
The controller is not suitable for use in harsh environments such as coating. If it
is necessary to use it in a place that does not meet the above conditions, please
contact our company or dealer.
The ambient temperature is only applicable to the controller.
The surface of the controller has general oil resistance. If it is possible to
contaminate the special oil, you need to confirm it in advance. Please contact
our company or dealer.
If the temperature and humidity change greatly, the inside of the controller may
be exposed to damage.
For food-related occasions, you need to confirm whether the controller has the
possibility of causing food contamination. Please contact our company or dealer.
Do not use in corrosive environments such as acids and alkalis.
Use in environments that are prone to rust such as salt, which may cause rusting
of components.
1.5.3. Storage Environment
Please pay attention to the following conditions when storing the arm/controller
and store it in the environment shown in the table below to ensure the quality and
service life of the arm/controller.
Environment conditions Storage environment
Storage temperature
5
℃～
45
℃
Storage humidity 20%~75% R.H. (No condensation)
[Note1]
[Note 1.] If the robot/controller produces condensation during storage, turn the
power on after removing condensation.